Home > Environmental > Water Purification > Pure And Ultra-Pure Water > Ultra pure water system OmniaTap 12

Ultra pure water system OmniaTap 12

For pure water and ultra pure water Type I + II.
OmniaTap is the ideal system when both pure water and ultrapure water are required, but in relatively small amounts. It provides both types from a single system. These also make it possible to connect the system directly to a drinking water tap. A touch on the flexible OptiFill dispenser button activates dispensing of ultrapure water type I via the digital dispenser control. The recirculation of the pure water held in the installed 10 litre tank keeps it permanently at type II quality.

Applications:
OmniaTap 12: AAS, IC, ICP, buffers and media preparation
OmniaTap 12 UV: Ultra-trace analysis, ICP-MS, HPLC, TOC-analysis
OmniaTap 12 UV/UF: Life science and microbiology, cell culture media

Scope of supply:
Ultra pure water system, filter cartridges, sterile filter capsule 0.2 µm

Specifications Type II	OmniaTap / OmniaTap UV / OmniaTap UV/UF
Ultrapure water output:	6 or 12 l/h
Resistivity:	15-10 MΩ-cm
Conductivity:	0.067-0.1 µS/cm
Pure water tank pressurized outlet:	optional
Type I
Dispensing performance:	up to 2 l/min
Resistivity:	18.2 MΩ-cm
Conductivity:	0.055 µS/cm
Bacteria (with end filter):	< 0.1 CFU/ml
Particles (with end filter):	< 1/ml
Feed water requirements:	Drinking water according to DIN 2000
Dimensions (W x D x H):	390 x 615 x 720 mm
Weight:	20 kg / 21 kg / 21 kg
Power supply:	90-240 V, 50/60 Hz