Home > Environmental > Water Purification > Pure And Ultra-Pure Water > Pure and Ultrapure water purification system Barnstead™ Smart2Pure™ Pro UV/UF, ASTM I and II

Pure and Ultrapure water purification system Barnstead™ Smart2Pure™ Pro UV/UF, ASTM I and II

The compact system converts tap water into ultrapure water (ASTM Type I) and pure water (ASTM Type II) via the filtration cartridge and UV/UF units. The integrated recirculation pump and the sterile ventilation filter protect against contamination and ensure tank water quality.

Mounting on the laboratory bench or on the wall
Leak detector
Warning message when consumable change is necessary
Easy cleaning due to bottom outlet and large opening
Tiltable display with simplified user interface
Code-protected system parameters
Kit contains a 0.1 µm end filter

Hand dispenser with 3 m cord optionally available.

Ultrapure water specifications ASTM Type 1
Flow rate: Conductivity:	1.0 l/min 0.055 µS/cm
Resistance at 25 °C: TOC value:	18.2 MΩ x cm 1 ... 5 ppb
Endotioxins: RNase:	<0.001 EU/ml <0.003 ng/ml
DNase: Bacterial content:	<0.4 pg/µl <0.01 CFU/ml
Particles >0.2 µm/ml:	<1
Pure water specifications ASTM Typpe II
Permeate flow rate: Conductivity:	16 l/h 0.067 ... 0.1 µS/cm
Resistance at 25 °C: Retention rate bacteria, particles:	1 ... 10 MΩ x cm 99 %
Specifications
Operating pressure: Interface:	1 ... 6 bar RS232
Feedwater connector: Dimensions (W x D X H):	3/4" NPT and 1/2" NPT 305 x 300 x 545 mm
Power consumption: Power supply:	0.12 kW 100 ... 240 VAC, 50 / 60 Hz