Humidity Chambers for environmental simulations
Active humidity control in the practically maintenance-free climate chamber ensures ideal homogeneity of temperature and humidity, at short recovery times after opening the door. This makes perfect environmental simulation in the humidity chamber possible. Heating at all six sides, including heated interior glass door. This minimizes vaporisation and reduces the risk of condensed water drips onto the samples. An aluminium thermal conductive layer supports optimum temperature distribution and serves as a heat accumulator in case of a temporary power failure. The climate chamber is perfectly suited for environmental tests, environmental simulations and accelerated life tests as well as 85/85 tests according to IEC 60068-2-67 and IEC 60068-2-78.
-TwinDISPLAY - multifunctional digital PID microprocessor controller with 2 high-resolution TFT colour graphic displays
-Programming and documentation of different temperature/humidity profiles via AtmoCONTROL
-Interface via Ethernet LAN, USB
-Triple overtemperature protection and simultaneous display of all parameters
-2 Pt100 sensors DIN class A in 4-wire measurement for mutual monitoring and assumption of functions in the event of a fault
-Process run time starts when the set temperature is reached
-Moisture supply with distilled water from external tank by self-priming pump
-Integral bacteria block by generating hotsteam
-Dehumidifying via sterile filter
-Visual and acoustic alarm
-Alarm messages via MobileALERT as e-mail or SMS
-Easy to clean and rust-resistant stainless steel for interior and exterior housing
-Calibration via three freely selectable values for temperature and humidity
-Works calibration certificate (measuring point chamber centre) at 60 °C with 75 % rh
-3 years guarantee worldwide
Specifications
Active humidity control: 20 %...95 % rh
Setting accuracy humidity: 0.5 % rh
Ambient temperature: 10 °C...30 °C
Working-temperature range: > RT...90 °C
Setting temperature range: 18 °C...90 °C
Setting accuracy temperature: 0.1 °C
Timer: 1 min. - 99 days
Max. loading per internal: 15 kg
Voltage: 230 V, 50/60 Hz
Product Specification:
Type: HCP 150
Capacity: 107 l
Internal dimensions (W x D x H): 560 x 400 x 480 mm
Shelf support ribs/shelves: 6/2
Housing (W x D x H): 719 x 591 x 850 mm
Weight: 75 kg
Power consumption: 1720 W
|
+353 (0)1 4523432
