+353 (0)1 4523432
| Syringe pumps Legato® The Legato® series syringe pumps provide the smoothest most accurate flow available. These innovative syringe pumps, offer unparalleled ease of use through the high resolution touch screen user interface. The intuitive touch screen enables the user to quickly create configurations and recall them for ease of use. All of the pump operating parameters are presented to the user on an easy to view run screen. Single syringe, single remote syringe, dual syringe and multirack configurations are available along with the infuse only or infuse/withdraw/continuous operation (model dependent). -Single and dual syringe infuse, infuse withdraw & continuous models -Holds syringe sizes from 0.5ul to 140 ml (Model dependent) -High resolution, chemically resistant colour touch screen display -Flow rates down to the picoliter/min (Model dependent) -Built in syringe selection table -Programmable interface without the need for a PC (Model dependent) -USB / RS-232 / TTL Interfaces for external control (RS232 available on Legato® 200 Series Only) -Rugged construction with cold rolled steel chassis -Integrated spill dam Applications: Electrospinning, Flow Cytometry, Microfluidics, Mass Spec, Drug Discovery, Organic Synthesis, Nanofluidics, Stereotaxic Injections Legato® 100 Single Syringe Infusion Pump Accommodates 1 syringe from 0.5ul to 60ml. Entry level pump in the Legato® series. This pump is ideal for applications where a single syringe is used. It allows a wide flow range from 1.26pl/min up to 88.28ml/min. Legato® 101 Dual Syringe Nanoliter Pump Accommodates 2 syringes from 0.5 1/4 l to 10ml. This infusion only pump is ideal for surface plasma resonance, organic synthesis and other applications where dual syringes are required with small volumes under 10ml. The Minimum flow rate 1.26pl/min for a 0.5ul syringe up to 25.99ml/min. Legato® 110 Single Syringe Infusion/Withdraw Pump Accommodates 1 syringe from 0.5ul to 60ml. The Legato® 110 is based on the Legato® 100. It offers infuse/withdraw flow control and programmability for up to two multi-step programs of 50 steps each. This pump is ideal for more complex multi-step dosing and has multi-mode operation including infusion only, withdrawal only, infusion and withdrawal and withdrawal/infusion modes. It allows a wide flow range from 1.26pl/min up to 88.28ml/min. Legato® 200 Dual Syringe Infusion Pump Accommodates 1 syringe from 0.5ul to 140ml. This unit supports infuse only. User definable flow rates with selectable target volumes or time values to control the total infusion volume. It allows a wide flow range from 3.06pl/min up to 105ml/min. Legato® 210 Dual Syringe Infuse/Withdraw Pump Accommodates 2 syringes from 0.5ul to 140ml. This unit supports infuse only, withdraw only, infuse/withdraw, withdraw/infuse and continuous mode. User defined flow rates with selectable target volumes. It allows a wide flow range from 3.06pl/min up to 105ml/min. Product Specification: Product Description: Legato® 210 Dimensions (W x D x H): 889 x 254 x 279mm Weight: 5.0 kg | |
| Catalogue Number | 6.267 702 |
| Manufacturer | KD Scientific |
| Manufacturer P/n | 788210 |
| Alternative Ref | LEGATO210 |
| VWR Ref | HYCLSH30022.01 |
| For syringes | 2 (0.5 µl ... 140 ml) |
| Type | Legato® 210 |
| PK | 1 |
| Dimensions (W x D x H) mm | 279 x 254 x 165 |
| Weight kg | 5.0 |
| Flow rate | 3.06 pl/min* ... 215.80 ml/min |
| Alternative Reference: | LEGATO210 |
| VWR: | HYCLSH30022.01 |