+353 (0)1 4523432
| Mixed-bed ion exchanger made of stainless steel Standard cartridge made of V4A stainless steel for general purpose application: To supply laboratory glassware washers, for general laboratory maintenance and for small industrial consumers. For subsequent demineralization of reverse osmosis systems. -pressure resistant to 10 bar -optimum exploitation of the ion exchanger capacity due to absolute uniform water distribution in the unit -flow rates up to 700 litres/hour -the unique behropur® jet nozzle system distributes the raw water over the entire resin bed. This ensures an optimum exchange capacity and quality -can be connected to the raw water network directly and without a pressure reducer -resistant to alternating pressure -hard rubber collars vulcanized to the base and top of the unit offer effective protection -convenient transport thanks to the handles embedded into the top part of the unit -conductivity is controlled directly on the unit (installed measuring equipment) or with remote location meter -Also available with shut-off when the limit value is reached and limit control E28d Pressure resistant mixed-bed unit made of V4A special alloy, permanent pressure resistant to 10 bar, complete with conductivity meter E40d Pressure resistant mixed-bed unit made of V4A special alloy, permanent pressure resistant to 10 bar, complete with conductivity meter E28dZ Pressure resistant mixed-bed unit made of V4A special alloy, permanent pressure resistant to 10 bar, spare cartridge E40dZ Pressure resistant mixed-bed unit made of V4A special alloy, permanent pressure resistant to 10 bar, spare cartridge E28dA Pressure resistant mixed-bed unit made of V4A special alloy, permanent pressure resistant to 10 bar, conductivity meter with limit switch and electrovalve E40dA Pressure resistant mixed-bed unit made of nylon, permanent pressure resistant to 8 bar, conductivity meter with limit switch and electrovalve Specifications E 28 / E 40 d Exchange capacity* at 10°dH 2800 litres / 4000 litres Flow max. litres/hour 500 / 700 Diameter in cm 24 / 24 Height incl. LF in cm 74 / 84 Height of cartridge only in cm 60 / 70 Product Specification: Product Type: E40dZ * Limit value 20 µS/cm | |
| Catalogue Number | 9.915 733 |
| Manufacturer | Behr |
| Manufacturer P/n | B00223489 |
press x to close