+353 (0)1 4523432
| Flame Photometer PFP7 -Industrial analysis -Low temperature -Incl. Na, K, Ca, Ba and Li filters -Electronic flame failure detection -Fine & coarse sensitivity controls -Operates on propane, butane, natural gas or L.P.G. supplies Fitted with automatic flame failure detection for user safety, making it ideal for use in clinical, industrial and educational applications. Supplied with: Fitted with electronic flame fail safe and supplied with Na, K, Li, Ba and Ca filters, connecting hoses and clips, compressor plug, drain trap, fuses and operating/service instructions Specifications: Ranges: 0 to 199.9ppm Limits of detection Na/K: < 0.2ppm Li: < 0.25ppm Ca: < 15ppm Ba: < 30ppm Reproducibility: < 1% / Coefficient of Variation for 20 consecutive samples using 10ppm Na set to read 50 Linearity: Better than 2% when concentration of 3ppm Na/K and 5ppm Li are set to read 100 Specificity: Interference from Na, K and Li equal in concentration to test element will be < 0.5% Recorder o/p: Nominal 1.00V for a reading of 100.0 Electrical: 90 - 125V or 190 - 250V 50/60 Hz Air: Moisture and oil free 6 l/min at 1 Kg/cm2 (14psi) Fuel: Propane, Butane, natural gas or L.P.G. Size: 420 x 360 x 300mm Weight: 8kg Supply requirements: 230V, 50Hz Product Specification: Product Type: PFP7 | |
| Catalogue Number | 9.309 409 |
| Manufacturer | Bibby Scientific |
| Manufacturer P/n | 500 701 |
| VWR Ref | 633-0031 |
| Type | FF-200D-I |
| PK | 1 |
| VWR: | 633-0031 |