Your basket is empty
Home > Laboratory > Stirring, Shaking, Mixing > Overhead Stirrer > Stirrers > BuddeMix Stirring System 1 - 4 > Buddeberg BuddeMix 3 Diam 120mm 40 26446 00536 8

Buddeberg BuddeMix 3 Diam 120mm 40 26446 00536 8
Enlarge

Buddeberg BuddeMix 3 Diam 120mm 40 26446 00536 8

PART NO: 4AJ-9779333
Price: €297.00
Out of Stock (Ships in approx. 2 weeks)

L 550mm
Wave 10mm
Stirr head 120mm
This novel stirring system has been conceived to mix low viscosity fluids as well as highly viscous media at slow speeds
Its special design creates inherent dynamic currents to produce perfectly homogeneous mixing results in very little time
Additional components like baffles bottom bearings etc. are not needed

BuddeMix Stirring System 1 - 4
This novel stirring system has been conceived to mix low viscosity fluids as well as highly viscous media at slow speeds. Its special design creates inherent dynamic currents to produce perfectly homogeneous mixing results in very little time. Additional components like baffles, bottom bearings, etc. are not needed.

Advantages at a glance:
-suitable for low to highly viscous fluids
-stirs media containing solids and fibres without any difficulty
-gentle, low-shear stirring, due to slow stirring speed
-constant product temperature, with no heating effect
-short mixing times as the entire contents of the container are agitated
-no air addition, no foaming
-no baffles required
-low gear wear due to balanced forces
-minimal power consumption thanks to low speeds and short operation times
-easy cleaning
-material no. 1.4404

Particularly for potentially explosive atmospheres:
-a single stirring zone, near to the container base, ensures easy mixing of settled residues, e.g. in flow-through mixing containers
-no baffles required, thus no additional sources of ignition

Product Specification:
Product Type: BuddeMix 3
Diam Agitator Shaft: 10mm
Length: 550mm
Material: No. 1.4404

Catalogue Number9.779 333
ManufacturerBuddeberg
Manufacturer P/n40 26446 00536 8
Material No.1.4404
TypeBuddeMix 3
Ø agitator shaft mm10
Length mm550
PK1
Ø agitator mm120
Your basket is empty