Gel electrophoresis tank OmniPage Mini The preferred unit for routine mini protein electrophoresis, the OmniPage Mini is constructed using the latest injection moulding manufacturing techniques. This gives a high quality, low cost product with unsurpassed finish, durability and strength. The unit incorporates a sealing system which is compatible with all major types of 8 x 10 cm and 10 x 10 cm precast gel. Gel casting and running utilise the same insert, no transfer of glass plates during gel casting is necessary. The insert contains the option of sliding clamps or just one screw per clamping bar side allowing very rapid set up of both hand cast and precast gels. Ultra soft silicone seals and pressure bars which surround the glass plates guarantee leak proof gel casting. 2 mm thick glass plates prevent breakage and have bonded spacers for convenience. Accessory electro blotting and tube gel modules are available which use the same outer tank and lid. Supplied with: OmniPage Mini: 10 x 10 cm dual, 2 sets of glass plates, electrodes, 1 mm thick bonded Spacers, 2 x 12 sample, 1 mm thick combs. OmniPage Mini SYS: OmniPage Mini + caster. OmniPage Mini CSV: OmniPage Mini + caster and blotting insert. Product Specification: Gel dimensions (W x L) : 7.5 x 8cm Unit dimensions (W x D x H): 19 x 13 x 15cm Max. sample capacity: 80 samples, 20 samples per gel Buffer volume: min. 250ml; max 1200ml Description: Comb 10 sample Thickness: 0,75 mm Sample volume: 30 µl | |
Catalogue Number | 6.229 790 |
Manufacturer | Cleaver Scientific |
Manufacturer P/n | VS10-10-0.75 |
Description | Comb 10 sample |
Sample volume µl | 30 |
PK | 1 |
Thickness mm | 0.75 |