+353 (0)1 4523432
- Chromatography
- Environmental
- Aquaculture
- BOD Respirometry
- Carbon COD-TOC-DOC-SAC-BOD
- Conductivity
- Dissolved Oxygen
- E-coli Online Monitoring
- Electrode Care and Maintenance
- Ionselective
- Multi-Parameter
- Nutrient Monitoring
- ORP-Redox
- pH
- Photometry
- Sample Analysis
- BOD
- COD
- Accessories for determining the COD
- behr COD Heating Blocks
- behrotest ® HTI 1 manual titration station
- COD cooling trough
- COD magnetic stirrer
- COD magnetic stirrer
- COD measuring station MD 200
- COD metering funnel
- COD Reagent
- COD sample digestion units PA-CSB
- COD Standard
- COD workstations, PB-CSB/M
- COD-Standard Cuvette Test, 16 mm
- HCl-absorber
- Thermoreactor CR 2200 / CR 3200 / CR 4200
- Thermoreactor RD 125
- Thermostat LT200
- TRS 300 programmable temperature and time control unit
- Workstations for SMA ARB
- Elemental Analysis
- Extraction
- Kjeldahl
- Milk Analysis
- Oil Testing
- Photometer
- Special Distillation
- Turbidity
- Sample Preparation
- Sondes
- Trace Analysis
- Turbidity Measurement
- UV Transmittance Monitors
- Water Flow Sensor
- Water Purification
- Water Samplers
- Laboratory
- Life Science
- promotions
- Ultra Violet Sanitisation
Thermoreactor RD 125
Chemical digestion of samples is required for the photometric determination of COD, TOC, total chromium, total phosphate and total nitrogen. The required temperatures and reaction time can be selected by using the membrane keypad of the reactor RD 125. The unit works at three different temperatures (100 / 120 / 150 °C) and three pre-set reaction times (30 / 60 / 120 minutes). When digestion is complete, the reactor automatically switches off and gives a corresponding LED indication with short beep alarm. The RD 125 reactor is fitted with 24 holes for 16 mm diameter vials.
| Specifications | |
| Power supply: | 230 V / 50-60 Hz or 115 V / 50-60 Hz (switchable) |
| Power: | 550 W |
| Dimensions: | 248 x 219 x 171 mm |
| Weight: | 3.9 kg |
| Holes in the aluminium block: | 24 holes, 16.2 mm ± 0.2 mm |
| Selectable temp.: | 100 / 120 / 150 °C |
| Selected time: | 30 / 60 / 120 / min. and continuous operation (∞) |
| Heating up: | from 20°C to 150°C in 12 min. |
| Protection against overheating | |
| Beeper | |
| Environmental conditions: | 10 - 40 °C max. 85 % rel. humidity |