+353 (0)1 4523432
- Chromatography
- Environmental
- Laboratory
- Life Science
- Cell Culture
- Cell Manipulation
- Centrifuge
- Cooling
- Filtration
- General Laboratory Consumables
- Genomics
- Concentration
- DNA and RNA isolation
- DNA-Electrophoresis
- Electroporation
- Gel-Documentation
- PCR Cabinet
- PCR Equipment
- 12/40/168-well PCR Rack, PP
- 24/48-well PCR plates, non-skirted, PP
- 32-well PCR rack, PP
- 96 well PCR plates FrameStar®
- 96-well PCR plates, PC/PP, rigid frame, incl. PCR sealing films
- 96-well PCR plates, PP, incl. PCR sealing films
- 96-well PCR plates, PP, non-skirted
- 96-well PCR plates, PP, non-skirted, with elevated well rim
- 96-well PCR plates, PP, raised half frame
- 96-well PCR plates, PP, semi-skirted
- 96-well PCR plates, PP, semi-skirted, for Roche® LightCycler® 480
- 96-well PCR plates, PP, semi-skirted, with elevated well rim
- 96-well PCR plates, PP, skirted
- 96-Well PCR Rack, PP
- 96-Well PCR Rack, PP
- 96-Well PCR® Rack, Low-Temp
- AccuSeal Semi-Automated Plate Sealer
- Automatic Plate Heat Sealer ALPS 5000
- Cap strips, PP
- Cap strips, PP, strips of 8
- Clear Seal
- Clear Seal MkII
- CloneSaver™ Cards
- DMSO Resistant Peel Seal
- Fast PCR-Tubes 0.1 ml, 8 tube-strips with separate cap strip
- Foil Seal
- FTA Card Accessories
- FTA Cards
- Heat sealing films, aluminium
- Heat sealing films, PE
- Isolation kits DNA/RNA, magnetic beads
- Isolation of viral RNA and DNA
- Isolation of viral RNA and DNA
- Lids for microtitration plates
- LLG-96-well PCR Plates, PP
- LLG-PCR tubes with attached lids, PP
- LLG-PCR-Tubes, 8 Strips with attached individual caps, PP
- Manual Heat Sealer for Microplates ALPS 50V
- Micro plates Riplate® magnetic
- OmniTray, PS
- PCR adhesive film and foil
- PCR box and PCR rack, PP
- PCR cap tool, PA
- PCR Foil, self-adhesive
- PCR Mini cooler, PP
- PCR Plates 384 well, Rigid Frame
- PCR Plates 384-well, PP
- PCR Plates 96 well, Rigid Frame
- PCR plates Eppendorf twin.tec® PCR Plates 384
- PCR plates, 96 well Eppendorf twin.tec®
- PCR plates, 96 well Eppendorf twin.tec® Trace, LoBind
- PCR plates, 96/384 well Eppendorf twin.tec® microbiology
- PCR plates, 96/384 well, Eppendorf twin.tec® Trace, BioBased, LoBind, PCR clean
- PCR plates, 96/384 well, Eppendorf twin.tec® Trace, BioBased, PCR clean
- PCR Tube Strips and Cap Strips
- PCR tubes strips, with attached single caps, PP
- PCR tubes, 0.2ml and 0.5ml, thin-walled
- PCR-Coolers
- PCR-Coolers
- PCR-Tube Cryobox
- Peel Seal
- Pierce Seal
- qPCR-Kits and Regents, Delta-Seek
- Racks for magnetic nanoparticle based separations
- Real-time PCR-system Prime Pro 48
- Sealing Film
- Sealing paddle for sealing films, PE
- Single PCR tubes with attached caps, PP
- Spin Columns, glass fiber filter
- Storage Plates
- Strips of 8 PCR tubes with attached cap strips
- Strips of 8-/12- PCR tubes plus detached cap strips, PP
- Support stands for PCR Cabinets Type Streamline ® / Airstream ®
- Thermocycler MultiGene™ OptiMax
- Water, nuclease-free
- Work trays for PCR
- Thermocycler
- Heating
- Histology
- Isolation Chamber
- Liquid Handling
- Microbiology
- Microscopy
- Molecular Cell Biology
- Occupational Safety
- Pipetting Aid Software
- Proteomics
- Sample Preparation and Sample Treatment
- Shaking and Mixing
- Spectrophotometer
- Sterilisation and Cleaning
- Stirring
- Vials, Caps & Test Tubes
- Virus Research
- promotions
- Ultra Violet Sanitisation
Thermocycler MultiGene™ OptiMax
This simple to program PCR thermocycler unit is compact in design, programming is intuitive with the large display and multiple pre-programmed templates supplied with the unit. The OptiMax comes with standard built in 2-step, temperature optimization, touchdown and time increment protocols that are easy to adjust to meet cycling needs. Select lid temperature or turn it off.
- Flexible Programming with FlexTemp™ technology
- Fast ramp rates 5 °C heating / 3.5 °C cooling
- No condensation after overnight cooling at 4 °C
- Individual temperature setting for each block
- Password protected programs
- Simple user interface
- With USB and RS232 interface
| Specifications: | |
| Sample capacity: | 1 x 96 well plate, 12 x strip tubes (8 x 0.2 ml), 96 x 0.2 ml tubes |
| Programmable temperature range: | 4 °C ... 99.9 °C |
| Temperature control: | Calculated or block |
| Temperature accuracy/uniformity: | ±0.5 °C/±0.5 °C |
| Heating/cooling method: | Peltier |
| Max. heating/cooling rate: | ±5 °C/±3.5 °C per second |
| Temperature range of 6-segment blocks: | 30 °C ... 99 °C (can be set independently) |
| Maximum temperature difference between 6-segment blocks: | ±24 °C |
| Programmable lid temperature: | 60 °C ... 65 °C, 100 °C ... 115 °C |
| Program memory: User program folders: | 200 complete programs 50 sets |
| Dimensions (W x D x H): | 240 x 420 x 250 mm |
| Weight: | 9 kg |
| Supply requirements: | 230 V, 50/60 Hz* |