CAP Viscometer Oil Fluids are used for calibrating CAP series viscometers. General purpose oil fluids are best suited for those instruments using Cone/Plate Viscometers/Rheometers. Confused about which standards you need? See our Viscosity Standard FAQ section.

Features and Benefits

Accuracy: +/-1% of viscosity value Appropriate for use at shear rates greater than 500 sec-1 Recommended for use with cone/plate Viscometers at viscosities above 5,000 cP Brookfield oil viscosity standards are hydrocarbon based, either mineral oil or polybutenes. Note: Other oil fluids are available - contact us for further details Brookfield Viscosity Standards are accurate to ±1% of the stated viscosity and are certified by methods traceable to the United States National Institute of Standards and Technology (NIST). The selection of one or two fluids will normally provide sufficient measurement points to verify calibration of your instrument. All fluids are supplied in 1/2 liter (1 pint) containers complete with a certificate of calibration. CAP Oil Fluids are supplied in 150 mL (4 oz) containers